Stop Point Adjustments on Rydeen 4-Parking Sensor Kits

View previous topic View next topic Go down

Stop Point Adjustments on Rydeen 4-Parking Sensor Kits

Post  Rob Haynes on Fri Jul 26, 2013 2:59 pm

All of our 4-sensor Parking Sensor kits have an adjustable "Stop" position.  The "Stop" position is the stage of our sensor kits where you hear a solid tone, and means there is an object within or under 1 foot of the bumper.  Out of the box our sensors work in a 4-stage operation where the closer an object is to the bumper the quicker the beeps happen before going solid, as shown below.
[You must be registered and logged in to see this image.]

Adjusting the stop point increases the distance of the "solid tone".  A perfect example of this would be a vehicle with a spare tire.  Out of the box the sensors look a foot from the bumper before initializing the stop tone.  If the spare tire stuck out more than a foot, you might hit that object.  By increasing the stop point, you can now make the spare tire the beginning of the stop point, and not the bumper as shown below.
[You must be registered and logged in to see this image.]

The stop point can be increased up to three feet and the switch to do so is on the backside of the sensor brain.

Stop Point adjustment on a BL412-PM & BL-422P sensor brain.
[You must be registered and logged in to see this image.]

Stop point on a BB411PM sensor brain.
[You must be registered and logged in to see this image.]

Hope this covers the adjustability options on our 4-sensor kits.  If not don't hesitate to PM me or send me an email at: [You must be registered and logged in to see this link.]
avatar
Rob Haynes
Admin

Posts : 26
Join date : 2013-01-15
Location : Santa Clarita, CA.

View user profile http://www.rydeenmobile.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum