Rydeen Mobile
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Sensitivity Adjustments on Rydeen 4-Parking Sensor Kits

Go down

Sensitivity Adjustments on Rydeen 4-Parking Sensor Kits Empty Sensitivity Adjustments on Rydeen 4-Parking Sensor Kits

Post  Rob Haynes Fri Jul 26, 2013 1:45 pm

One nice feature about all of our 4-sensor Rydeen parking sensor kits is the ability to adjust the height and width sensitivity of the sensors.  These can be adjustments can be made directly on the parking sensor brain, so lets take a look at it.

Our parking sensors are preset at the factory for proper operation, but adjustments can be made by adjusting the dial below with a flathead screwdriver.

Here is the adjustment point on the BL412-PM and BL-422P brains.
[You must be registered and logged in to see this image.]

Here is the adustment point on the BL411PM brain.
[You must be registered and logged in to see this image.]

Adjusting the dial in a counter clockwise location will decrease the sensitivity (lowers the height but widens the width that the sensors read).  Adjusting the dial clockwise will increase sensitivity (widens both the height and width that the sensors read.)
[You must be registered and logged in to see this image.]

In most cases the sensitivity of the sensors will not need to be adjusted, but in those situations where an adjustment is needed, this will be how you do it!

If there are any other questions please don't hesitate to contact me at:
[You must be registered and logged in to see this link.]
Rob Haynes
Rob Haynes
Admin

Posts : 26
Join date : 2013-01-15
Location : Santa Clarita, CA.

http://www.rydeenmobile.com

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum