MV311S installation

The MV311S is one of the most easiest mirror to install in the market.
The wire harness has 2 wires and a RCA. Red wire connects to the car accessory wire and the Black will be ground. RCA input connects to the camera RCA.

The MV311S will show a green light on the right side of the power button. This means that the mirror is getting voltage from the vehicle.

Video inputs
Camera input triggers automatically and overwrites Video 1 input (IF VIDEO 1 IS IN USE). Middle button can adjust the brightness when backup mode is active.

Video 1 is the secondary camera input. Middle button can turn ON and OFF the LCD if Video 1 is in use.

My system is all set up. and was running perfect for 2 months, now the display screen in the mirror is flickering or doesn't come on. if i wiggle the mirror or shifter. it comes up and its fuzzy.? What to do ?

Hi.!

Did you purchase the kit or just the mirror only?
The reason I asked is because I want to find out if you're using our camera or different brand.

You can also check the other video input just to check if that video input is faulty.

For your MV311S mirror/monitor do you have a mount that fits my
2011 VW jetta 4dr TDI diesel.